Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2002, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 20 Jul 2002 07:28:41 -0400
Reply-To:     Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US>
Subject:      Re: sliding window latch removal
In-Reply-To:  <20020718022714.42971.qmail@web12207.mail.yahoo.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

yeah, that was not too hard to do once I knew how it worked. I used the bit from one of those screwdrivers that you can put different tips into. Held it up with a fingertip and turned it with some needle nose pliers. that worked fine. Thanks for the advice. Edward

At 7/17/02 07:27 PM, you wrote: >The standard screw IS up there, grab a mirror to get >an idea of what size screwdriver you are going to ruin >by bending it to fit up there. I used a cheap old long >shaft screwdriver and bent it with a vise. If they >made that screw a phillips head it would be alot >easier, youll see what i mean. > >Good luck > >Phil Stanhope, 84' Westy Tiico > > >what I did is I got a sma >--- Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US> >wrote: > > How to get it off? I found this (below) in the > > archives. I see a round > > hole in the bottom of the latch part that you move > > up and down. Is that > > what Adam and Stan are talking about? I couldn't > > see a screw up there. > > Thanks, > > Edward > > > > >The screws threads are fine and it seems to take > > forever to get out doing > > >half turns, so be patient and it will come off. > > > > > > > > >Adam Puzerewski > > > > > >81 westy > > >74 beetle > > >73 Transporter (new!!!!!!!) > > > > > >Vanagon Partsmobiles > > >----- Original Message ----- > > >From: "Stan Wilder" <wilden1@juno.com> > > >To: <vanagon@GERRY.VANAGON.COM> > > >Sent: Saturday, May 05, 2001 10:47 AM > > >Subject: Re: [VANAGON] ISO Sliding Window Latch > > > > > > > > > > The little sliding door latch has a screw up > > through the bottom. You > > > > need a little 90 Degree straight slot > > screwdriver to get at the screw. Be > > > > careful when it comes off there is a little > > spring that will fall out as > > > > the lastch comes off dis-assembled. > > > > > > > > That's it. > > > > > > > > Stan Wilder > > > > 83 Westfalia Air Cooled > > >__________________________________________________ >Do You Yahoo!? >Yahoo! Autos - Get free new car price quotes >http://autos.yahoo.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.