Should be copper washers. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Dave Baker Sent: Saturday, July 27, 2002 2:11 PM To: vanagon@GERRY.VANAGON.COM Subject: Drain Plug Question A quick question for the list: Are there washers or some other type of gasket that fits over (i.e., under) the coolant drain hex bolts on the bottom side of the heads on my 1.9 L 85? I looked through my engine gasket kit and could only find one washer that fit the plug. I would expect to find two, so my thoughts are I'm either missing one, or a washer is not required here. Thanks in advance (TIA). Dave in KC 85 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.