Hi all, Just a quick Q. I'm converting my 90 GL to a Carat. A am at the stage of cutting the bench seat bracket off and moving it back an inch or so. It appears that my existing bench seat posts/stops are going to be too short for the narrower bench seat of the Carat Bench seat.... Does any one have the measured length of a Carat bench seat post/stop. Bench seat post/stop: I am not sure of the exact technical name of them but they are the two posts that stick out of the side that engage the rear bench seat and keep it from going all the way back and keep it locked in so it doesn't come forward until released.
TIA Jere |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.