Greetings; Spent the last hour searching the archives, to no avail. Bentley shows three shims A,B & C. A(the one with the tab) obviously goes on the inside of the main bearing. The three C shims must go on the outside of the main bearing so you can adjust endplay without splitting the case. But what about shim labeled B? Does it go on the inside or outside? ALso Bentley shows it as having a much larger diameter, does it always? I have four shims of equal diameter in the bag of parts.
TIA Ken Lewis 86 Crewcab 219K+ miles http://Neksiwel.20m.com/ ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.