Date:         Thu, 25 Jul 2002 23:24:41 -0400
Reply-To:     Tim Hannink <tjhannink@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tim Hannink <tjhannink@EARTHLINK.NET>
Subject:      Re: Tiico Oil Cooler / Aftermarket oil pressure gauges
Comments: To: "Phil S." <napszeerf@YAHOO.COM>
Content-Type: text/plain; charset="us-ascii"

Check out this site of Autometer thread adapters: http://www.dieselmall.com/Products/AutoMeter/Pg87.asp

Your local speed shop should be able to special order these for you or you could order them on this site.

Good luck,

Tim Hannink
Winter Park, Florida
Goldibox - 1987 Vanagon Camper, Wolfsburg Edition
http://home.earthlink.net/~tjhannink/
http://photos.yahoo.com/tjhannink Vanagon Album
http://groups.yahoo.com/group/wolfsburg_campers/



-----Original Message-----
From:   Phil S. [SMTP:napszeerf@YAHOO.COM]
Sent:   Thursday, July 25, 2002 3:50 PM
To:     vanagon@GERRY.VANAGON.COM
Subject:        Tiico Oil Cooler / Aftermarket oil pressure gauges

The Tiico oil cooler has two 10mm inputs for adding an
oil pressure gauge and an oil temp gauge. I have found
electric oil pressure gauge but NO metric threaded
sensors/senders. the sender on one brand has 1/8"
tapered pipe threads that almost fit into 10mm.....BUT
the oilcooler requires a sensor/sendor WITH a gasket
NOT one with pipe threads. I am very confused and
NAPA, CARQUEST, AUTOZONE all only carry standard
threads, where should i go?

THanks

Phil Stanhope 84' Westy, Tiico



__________________________________________________
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com