The most common leak is faulty "o" rings where the lines connect to the compressor. I would check these first. Be sure to use AC quality "o" rings and not the ordinary rubber variety. There are also several other "o" rings where connections are made. The dryer and the needle valve are two I can think of. You might also have a leak in a rubber line, but I would check the fittings first. Another source of a leak is the seal behind the compressor pulley. George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.