Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2002, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 30 Jul 2002 21:06:06 -0400
Reply-To:     George Averill <averill@LDL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         George Averill <averill@LDL.NET>
Subject:      AC Leaks
Comments: To: paradigm@ALLEGRAPRINTING.COM
Content-Type: text/plain; charset="iso-8859-1"

The most common leak is faulty "o" rings where the lines connect to the compressor. I would check these first. Be sure to use AC quality "o" rings and not the ordinary rubber variety.

There are also several other "o" rings where connections are made. The dryer and the needle valve are two I can think of. You might also have a leak in a rubber line, but I would check the fittings first.

Another source of a leak is the seal behind the compressor pulley.

George


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.