>The emblems are held in place primarily by double sided adhesive trim tape. >Probably 3M. There are small studs which are then pushed onto plastic >grommets. That is all. You can carefully pry the emblems off. I find they are >much easier to remove on a warn sunny day. The adhesive gets a bit softer >then. The studs in back are most likely used to locate the nameplate properly >more than any other purpose (IMHO). Try warming them GENTLY with a fanheater or hairdryer to soften the adhesive, as you would with decals. -- Andrew Grebneff 165 Evans St, Dunedin 9001, New Zealand <andrew.grebneff@stonebow.otago.ac.nz> Seashell, Macintosh, VW/Toyota van nut |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.