Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2002, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 31 Jul 2002 15:13:21 -0400
Reply-To:     Marla Stelk <mjstelk@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Marla Stelk <mjstelk@HOTMAIL.COM>
Subject:      Re: Flush & Fill & Fan Switch questions
Content-Type: text/plain; charset="iso-8859-1"

I recommend following the Bentley manual instructions - I did it and I'm not a "seasoned" mechanic - the proper procedures will vary depending on the make/model/year of your Westy. I have an '87 Digifant which is supposed to be self-bleeding, but I still bled the system until I had coolant come out the bleeder screw on the radiator. Prior to that, however, I emptied out the coolant by taking off the lowest hose and then filled the expansion tank with distilled water until it came out of the lowest hose clear. One tip - jack your van up at the nose about 4" so that gravity will do some of the work for you. If any one knows anything regarding thermoswitches I'd love some help - I can't seem to find mine - thought it should be below the bleeder screw but there is nothing there. Having problems with my fan not coming on until the temp gauge is about 3/4 to 7/8 of the way to the top. Thanks, MJ ----- Original Message ----- From: Malcolm Stebbins Sent: Wednesday, July 31, 2002 2:44 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Flush & Fill & Fan Switch questions I just watched my mechanic flush my '91 syncro coolant, he went to a lot of work!!!! I think that MAYBE the simplest way would be to remove the thermostat (close up the housing) and then remove a few return hoses and put a water hose into the reservoir and let the engine run till the water coming out is clean. Turn off the engine & let the system drain, put hoses back on and put in 8 or 9 litres of coolant then top it up with water as you bleed the system. I hope someone can tell me why this will NOT work. I've been wrong before. Malcolm

On 31 Jul 2002 at 13:57, Warner, Jeff (DSIO-MS) wrote:

> Volks, what do you think is the simplest, most effective, way to > repeatedly drain the system?Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.