In a message dated 8/2/02 5:44:16 PM Pacific Daylight Time, 72510.1173@COMPUSERVE.COM writes: << Here is where I picked mine up: http://www.bugsandbuggies.com/Parts.asp?CN=914&SN=102&GN=13&Subgroup=Wheel+A dapters%2C+Mounting+and+Covers&RefPage=Sway-A-Way They were real good about shipping them out fast. >> Helen & Joe, et al. The one objection I have to these units is you have to ream (make the bigger) the holes in your hub to fit them per the instructions on the webpage you noted above. There are aftermarket and factory studs available which do not require you to alter your hubs. Not to mention cheaper than these guys. You can also get Porsche studs which work w/o modifications but much pricier. At any rate, if anyone desperately needs longer rear studs, I can offer some assistance as long as the number of requesters do not get overwhelming as they did in the past. BenT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.