Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2002, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 13 Aug 2002 00:09:20 -0700
Reply-To:     mark drillock <drillock@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mark drillock <drillock@EARTHLINK.NET>
Subject:      Re: Parking Brake Slipping
Comments: To: Fredrich Hesterberg <FredsVW@WEBTV.NET>
Content-Type: text/plain; charset=us-ascii

Terry, you must not have worked on Vanagon rear brakes for a while, if ever. There is no adjustment at the bottom. Check your Bentley if you have one.

Mark

Fredrich Hesterberg wrote: > > Mr.Mark, > This is not true. > The parking brake is to be adjusted at the bottom of the shoe on the > fork where the lower part of the shoe rests. > It screws out as well as in to do this adjustment. > It is to be some kind of even from top to bottom of shoe to make contact > with drum at same time as top. > I have found this is most important for parking brake, and regular brake > to be working good. > Lever is important, but no adjust is not right either > Good evening, > > Fred > > E-mail message > > You should remove the drums and look at the brake hardware. The parking > brake cable moves a lever that is attached to the rear most brake shoe > on each side. Check for a problem with that lever or with the end of the > self adjuster that contacts the lever when the parking brake is used. > I have recently seen 2 Vanagons with failures in this area. I used to > think it was trouble free. > Mark > Steven Dodson wrote: > Hallo, me again... > My new 87 Syncro GL's parking brake has been slipping and I've had to > pull the brake lever excessively high to get little improved grip. I > looked underneath and the p-brake adjuster nut is bottomed out, no more > adjustment. I thought the brake pads must be bad but they looked great > through the inspection hole. The brake adjustment looks good also, there > is almost 1mm clearance with brakes off. > What am I missing? > Seems I should be able to hold the vehicle on a slight incline with the > p- brake. Right? Anyone? > The curse of Inga continues...


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.