Date:         Mon, 12 Aug 2002 07:35:56 -0700
Reply-To:     TinkerMan <tinkerman007@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         TinkerMan <tinkerman007@YAHOO.COM>
Subject:      Re: oil pressure relief valve spec
Content-Type: text/plain; charset=us-ascii

--- Jay L Snyder <Jay.L.Snyder@usa.dupont.com> wrote:
>
> Goes at around 80 psig.  If you install a gauge you
> will see it go to 80
> psig or so and start to drop as the oil warms a bit.

Thanks!
what's "psig" (sp?)?
Where did you find the spec? Did you find it in the
manuals or just from real world measurements?



=====
Cheers, T-man.

__________________________________________________
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.