Date: Wed, 21 Aug 2002 22:32:41 -0500
Reply-To: tmarciniak@WI.RR.COM
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Tim Marciniak <tmarciniak@WI.RR.COM>
Subject: Re: Need advice on replacing accelerator pedal
In-Reply-To: <21094-3D630CE7-551@storefull-2357.public.lawson.webtv.net>
Content-Type: text/plain; charset="us-ascii" ; format="flowed"
Good to hear, where the coolant lines near the tranny in your way.
Tim
>I replaced the whole cable in 1 hour.
>No to big job
>
>
>Fred
>
>
>Received: from smtpin-2208.public.lawson.webtv.net (209.240.213.138) by
> storefull-2358.public.lawson.webtv.net with WTV-SMTP; Tue, 20 Aug
> 2002 19:51:23 -0700 (PDT)
>Received: from gerry.vanagon.com (gerry.vanagon.com [66.95.48.130]) by
> smtpin-2208.public.lawson.webtv.net (WebTV_Postfix+sws) with ESMTP
> id A6E61FE20 for <FredsVW@WEBTV.NET>; Tue, 20 Aug 2002 19:51:22
> -0700 (PDT)
>Received: from gerry (gerry.vanagon.com) by gerry.vanagon.com (LSMTP for
> Windows NT v1.1b) with SMTP id <0.FBAEC1FA@gerry.vanagon.com>; Tue,
> 20 Aug 2002 22:41:15 -0400
>Received: from GERRY.VANAGON.COM by GERRY.VANAGON.COM (LISTSERV-TCP/IP
> release 1.8d) with spool id 708161 for vanagon@GERRY.VANAGON.COM;
> Tue, 20 Aug 2002 22:41:15 -0400
>Received: from mail6.wi.rr.com (fe6.rdc-kc.rr.com) by gerry.vanagon.com (LSMTP
> for Windows NT v1.1b) with SMTP id <0.FBAEC1F8@gerry.vanagon.com>;
> Tue, 20 Aug 2002 22:41:15 -0400
>Received: from [24.209.175.7] ([24.209.175.7]) by mail6.wi.rr.com with
> Microsoft SMTPSVC(5.5.1877.537.53); Tue, 20 Aug 2002 21:38:46 -0500
>Mime-Version: 1.0
>X-Sender: tmarciniak@pop-server.wi.rr.com
>Content-Type: text/plain; charset="us-ascii" ; format="flowed"
>Message-ID: <a0510030bb988adbea25a@[24.209.175.7]>
>Date: Tue, 20 Aug 2002 21:50:58 -0500
>Reply-To: tmarciniak@WI.RR.COM
>Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
>From: Tim Marciniak <tmarciniak@WI.RR.COM>
>Subject: Need advice on replacing accelerator pedal
>To: vanagon@GERRY.VANAGON.COM
>
>I searched the archives and find lots of posts on corroded and broken
>accelerator cables but nothing that really described replacing this
>cable. Just wondering how difficult it is. Near the auto
>transmission my cable is rusty and corroded because the boot that
>covers it has pulled away from its attachment point. When I press
>the accelerator pedal to the floor--it sticks--and then a few moments
>later it releases. I have dried to spray WD40 onto the cable and
>this has only been marginally effective. There are also a couple of
>coolant hoses in the way that prevent me from actually touching this
>cable. Bentley has pictures but gives no direction as to how to
>replace it only talks about adjustment. Just wondering if any one
>has done the R/R of this cable? Wondering if threading a new cable
>back through is difficult? Do you thread from back or front? Do I
>need to replace the plastic sheathing? Is adjustment difficult?
>
>TIA
>
>Tim
>90 Multivan Automatic
>--
--
|