You can read my account of the project here: http://gerry.vanagon.com/cgi-bin/wa.exe? A2=ind0208B&L=vanagon&P=R15089&D=0&X=3E685A7F090C300473&Y=zadar72@yahoo.com The one thing I can recomend is finding a high/low switch connector and wires from a stripper vanagon. these are used to trip the relays and not have to cut wires. But then I used Alistar Bell's diagram and procedure. The easiest way IMHO and gives results. you may have to modify somewhat for your foglights. http://homepage.mac.com/alistairbell/home/index.html Good luck, and you won't regret it. John
>Kim wrote: >"Crafting up relays and a new wiring circuit for the headlights, high beams >and fog lamps for both Vanagons." > >I'll be interested to hear what you have to say about your process of >installation. I've been procrastinating this for 6 months (have the >parts)...getting close to the doing as the self-loathing is about maxed. >Bob Stevens >'91 Westy > >http://groups.msn.com/BobsPhotoShare > > > >_________________________________________________________________ >Join the world’s largest e-mail service with MSN Hotmail. >http://www.hotmail.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.