Sounds a little fishy. Is it packed with Moly yet? I'd pack it, then see how it moves. It should be REALLY snug when new, but you shouldn't have to force it. Lack of lube could be the issue.
Developing business and guiding change since 1996, G. Matthew Bulley Bulley-Hewlett Marketing & Communications Business: www.bulley-hewlett.com AIM = IExplain4u Phone: +1.919.658.1278
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of Will Morris Sent: Friday, August 16, 2002 9:32 AM To: vanagon@GERRY.VANAGON.COM Subject: CV joint question I am about to install a new inboard CV joint. The new joint I got from VW is incredibly tight/stiff, MUCH more than my old one. To get the inner bearing retainer to move at all I have to press super hard with both thumbs. I've repacked old joints before, but this is my first new one. Is this stiffness normal for a new joint? Does it loosen up over time? thanks, Will |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.