Date:         Sun, 18 Aug 2002 09:40:23 -0700
Reply-To:     Bill Hopper <bill_hopper@PRODIGY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bill Hopper <bill_hopper@PRODIGY.NET>
Organization: Prodigy Internet
Subject:      brake light problem
Content-Type: text/plain; charset="Windows-1252"

I need help with a brake light problem on my 84 westy. 
Stop lights don't work. I disconnected the switches (there are two) at the master cylinder and used a jumper wire between the terminals on the socket and the brake lights worked. It seems to me that indicates the problem should be with the switch(es). Both switches were replaced, and still no brake lights. The master cylinder was replaced about 6000 miles ago, and the fluid is relatively new. 
Any help/suggestions would be appreciated.

TIA, Bill  

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.