Date:         Tue, 20 Aug 2002 09:45:57 -0400
Reply-To:     "Russell, William" <william.russell@UW-INC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Russell, William" <william.russell@UW-INC.COM>
Subject:      Re: Second Battery Installation
Comments: To: Lawrence Johnson <larry_avery.johnson@SYMPATICO.CA>
In-Reply-To:  <3D623360.4682AF19@sympatico.ca>
Content-Type: text/plain; charset="us-ascii"

Are you suggesting that I split the cable that is currently connected to
the starter battery and then connect the relay at that point?  Will that
operate the same way?

Where did you locate the fuse?

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
Of Lawrence Johnson
Sent: August 20, 2002 08:18
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Second Battery Installation

Russel, a closer connection point is the +ve terminal of the starter
battery.
There should be a hole already cut in the side of the box under/behind
the
driver's seat and a similar whole in the main battery compartment. The
relay
will fit in either battery box. I added a fuse too.
Larry in Ontario, Canada

"Russell, William" wrote:

> I had intended to run a nice big cable from that battery compartment
back to
> the engine and connected it to the relay that I purchased.