Date:         Tue, 20 Aug 2002 10:59:11 -0400
Reply-To:     Kenneth Wilford <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kenneth Wilford <kenwilfy@COMCAST.NET>
Subject:      Re: Master Cylinder Question
Comments: To: Dan Erlandson <danoer1@ECLIPSE.NET>
In-Reply-To:  <B987CDDC.1F4E%danoer1@eclipse.net>
Content-type: text/plain; charset=us-ascii

Some earlier vans have this problem.  I just advise folks to swap over thier
old switches like you have already done.  The switches coming with the MC is
a bonus anyway as other brands like FAG don't come with the switches and are
the same price.  If you really needed replacement switches I am sure that we
could work something out in a trade for the ones you recieved.  Let me know.

Thanks,
Ken Wilford
John 3:16
http://www.vanagain.com
Phone: (856)-327-4936
Fax: (856)-327-2242

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Dan Erlandson
Sent: Tuesday, August 20, 2002 10:44 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Master Cylinder Question


I have my dashboard out (replacing the fresh air fan) and am also doing the
master cylinder.  The one I had ordered from Van Again in NJ came with 2
brake light switches mounted in cylinder.  Problem is tho that my old
switches were 2 prong and these new ones are three prong.  I've switched the
switches :) and the old ones fit fine but I'd rather use the newer ones.
Can I just plug the two prong female connector onto two of the three males
in the new switches and ignore the third?  or did I get the wrong one from
Van Again??  Thanks for any help here.


-- Dan Erlandson
Flemington, NJ
> danoer1@eclipse.net