Volks: I received my new Lobro CV's today and am planning to pack them tomorrow morning. I was wondering if there is a right way and wrong way to install them on the half-shafts. The CV's themselves have a groove machined in the outter egde of the joint, and IIRC when I took the old CV's off the half-shafts the grooved end of the CV's were all oriented toward the ends of the shafts. Is my memory correct or should the end with the groove be pointing inward. Or doesn't it matter? Any help would be appreciated. Dan Weber "Miss Blue" - '87 GL Wekender |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.