My syncro has an underpanel at the front where the spare wheel on a 2WD goes. This seems to be for weather and foreign body protection. It was a pain to get it off due to seized/loose anchor nuts (I drilled out the bolts) Is this flat bottomed tapered panel standard or syncros? There appears to be no provision at the front or rear for spare carrier hinge/securing fitments. Was this because the syncro was expected to get the spare bashed badly when off-road? PS - its not a syncro 16 (I'm wanting to put my 15" under there) Thanks, Clive '88 Syncro Transporter |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.