Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2002, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 27 Aug 2002 22:47:52 +0100
Reply-To:     Clive Smith <clive.harman-smith@NTLWORLD.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Clive Smith <clive.harman-smith@NTLWORLD.COM>
Subject:      Re: Power Chip for Digijet Vans now available!
Content-Type: text/plain; charset="iso-8859-1"

Aha, clear as mud :-)

No, thats fine - so there are no original DJ 2.1's. But plenty of Digijet systems. I keep seeing 10:1 compression ration for these, but I'm sure mine's originally quoted as 10.5:1, not a lot different , and 111-112 BHP

Clive '88 Syncro Transporter

----- Original Message ----- From: "Kenneth Wilford" <kenwilfy@comcast.net> To: "Clive Smith" <clive.harman-smith@ntlworld.com> Sent: Tuesday, August 27, 2002 10:39 PM Subject: RE: Power Chip for Digijet Vans now available!

> There are many Digijet Vanagons over here (DH engine code). They were made > between 83-85. When they went to the 2.1l engine (86-91)they went to the > Digifant system. However many people with older Vanagons have transplanted > 2.1l engines in their earlier vans with the Digijet injection system (works > fine on the 2.1l (MV)engine). Our chip is a clone of the chip in your DJ > engine computer (Digijet for the 2.1l). There are a few minor internal > differences between the DJ engine and the MV. Some of the power is made > just by the chip. This is what we are trying to tap into. Is this any > clearer? > > Thanks, > Ken Wilford > John 3:16 > http://www.vanagain.com > Phone: (856)-327-4936 > Fax: (856)-327-2242 > > -----Original Message----- > From: Clive Smith [mailto:clive.harman-smith@ntlworld.com] > Sent: Tuesday, August 27, 2002 5:19 PM > To: Kenneth Wilford > Subject: Re: Power Chip for Digijet Vans now available! > > > Ken, > > I thought there weren't any DJ engined banagons in the States, I was told > they're all Digifants. > My UK DJ is, I believe, rated at 111 -112 BHP with the ignition set spec. > for High Octane. > > What IS the situation? > > Clive > '88 Syncro Transporter > > ----- Original Message ----- > From: "Kenneth Wilford" <kenwilfy@COMCAST.NET> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Tuesday, August 27, 2002 4:08 PM > Subject: Power Chip for Digijet Vans now available! > > > > If you missed the Boston Engine post, I thought I would repost with a > > different title. > > > > Bob and I have been working on getting some chips from ECUs from Europe > that > > are for the fabled DJ 2.1l engine (115 horsepower waterboxer). We got one > > for testing and Bob tested it this weekend on a dyno in his '85 Vanagon > that > > has a 2.1l big valve engine in it. He got a 20% increase in power on the > > dyno (not my seat of the pants, or some fairy tale where we quote numbers > > from a book that we have never seen). This chip is more agressive in the > > fuel mapping and would be an upgrade for anyone with the Digijet system > > (83-85 here in the US). We are going to start selling these upgraded > chips > > already installed in ECUs for $250 plus your old ECU as a core. > > > > If you felt left out by the Australian chip being an older Vanagon owner, > > now is your time for happiness :) This upgraded chip would be a must have > > for any folks out there that are running 2.1l engines in thier used-to-be > > 1.9l Vans. You should also see a performance increase in a 1.9l engine > but > > it might not be as drastic. You will need to change your timing and > mixture > > after installing this new chip (something that is required when you do any > > kind of performance upgrade). If you are interested in these chips please > > email me or Bob. I am going to be selling just the chips, while Bob is > > going to be selling them with his engines for now, and then in the future > we > > will probably both be selling just the chips. The chips are soldered in > so > > we won't sell the chip by itself, but get in core ECUs and install the > chips > > in them for you. We already have a few that should be ready for shipment > by > > next week so if you are interested let us know. > > > > Thanks, > > Ken Wilford > > John 3:16 > > http://www.vanagain.com > > Phone: (856)-327-4936 > > Fax: (856)-327-2242 > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.