I just drilled the two 3/8" holes for the U-bolt that fastens the D-bushing/bracket to the bottom of the frame. I cant seem to fit the U-bolt inside the framemember, becouse the upper frame that crosses the crossmember is blocking the insertion. And the flippin' directions were written by someone with a typewriter that brakes down after fifty words, absolutly no where does the directions say "Vanagon" and the sales rep confirmed its the right kit for us. Says:"Directions are for kit 354" Directions say: "Place a lock nut on one end of the U-bolt, insert other end into the second hole drilled in the frame bottom. Maneuver until it reappears from the other hole. Place the free end of the bar bracket around it and start another lock nut" Will i have to re-drill the holes in another area?(further out toward the sides) Thank for your help Phil 84' Westy Tiico __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.