Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2002, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 30 Aug 2002 12:38:18 -0400
Reply-To:     Scott Grillo <sgrillo@FLYTWA.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Grillo <sgrillo@FLYTWA.NET>
Subject:      =?utf-8?Q?RE:_=C2=A0_=C2=A0_=C2=A0_glove_compartment=3F?=
Comments: To: KimBrennan@AOL.COM
In-Reply-To:  <1a4.77c3e73.2a9d98cf@aol.com>
Content-Type: text/plain; charset="utf-8"

My 1985 was with the ball and plastic strap. My 1990 and 1991 have the tabs, no cables.

Hope this helps

--------Original Message----- ---From: Vanagon Mailing List ---[mailto:vanagon@gerry.vanagon.com]On Behalf ---Of Kim Brennan ---Sent: Tuesday, August 27, 2002 11:09 PM ---To: vanagon@GERRY.VANAGON.COM ---Subject: Re: glove compartment? --- --- ---In a message dated 8/27/02 10:40:58 PM, roch00@YAHOO.COM writes: --- ---> My glove dept doesn’t close easily and seems a bit lop ---sided. Is this ---> correct….the left side has a plastic cable that connects ---it where the ---> ball portion goes into the hole. On the right side, ---there is the same ---> hole but no plastic cable. Instead there is a plastic cable that ---> loops on below this upper hole. Should there be 2 plastic ---cables on ---> the right side? ---> ---> ---Interesting. Your description does not match my glovebox, at ---least on my 91 ---Westy, which I had out and off just the other day. There are ---no cables of any ---kind on mine. It has two tabs at the rear corners. I push ---these in to clear ---the front of the dast, and the whole thing pivots, almost ---upside down. Then ---the hinge is in a postion to slide out in its keyed ---position. What year are ---you dealing with? --- ---> Also the square plastic piece that holds the lock wobbles from the ---> inside. I can’t find any screws to tighten this piece. ---How does one ---> tighten? ---> ---


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.