Date:         Sat, 31 Aug 2002 12:26:16 -0700
Reply-To:     "Phil S." <napszeerf@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Phil S." <napszeerf@YAHOO.COM>
Subject:      PST Rear Sway Bar installation issues.......HELP!
Content-Type: text/plain; charset=us-ascii

I just drilled the two 3/8" holes for the U-bolt that
fastens the D-bushing/bracket to the bottom of the
frame. I cant seem to fit the U-bolt inside the
framemember, becouse the upper frame that crosses the
crossmember is blocking the insertion.
And the flippin' directions were written by someone
with a typewriter that brakes down after fifty words,
absolutly no where does the directions say "Vanagon"
and the sales rep confirmed its the right kit for us.
Says:"Directions are for kit 354"

Directions say:
"Place a lock nut on one end of the U-bolt, insert
other end into the second hole drilled in the frame
bottom. Maneuver until it reappears from the other
hole. Place the free end of the bar bracket around it
and start another lock nut"

Will i have to re-drill the holes in another
area?(further out toward the sides)

Thank for your help

Phil 84' Westy Tiico

__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com