william urban wrote: > So I changed the fitting, gasket, and the sending unit. The leak stopped > but > then after driving 10-20 miles the oil light/ buzzer started coming on > at 2200 rpm. > The trouble is probably in the first line above. "I changed the sending unit." There is an issue with Vanagons over the correct sending unit. I can't remember the details but I remember that this problem exists. I would almost bet you wound up with the wrong one, especially since you didn't do anything else at the time. Be aware of this problem, and see if you can find out the details and nature of this conflict of which is the proper sending unit. Good Luck. John Rodgers 88 GL Driver |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.