Hi Bill Urban, I have a simple procedure to check the 2.1L Dynamic oil pressure warning system. IF you can operate a voltmeter you can find the fault in your warning system. Larry's right about the oil pressure switches being in the correct location, 0.3 bar by the push rods and 1.8 bar behind the pulley. You can also substitute a 0.9 bar for the 1.8 bar switch if your system is overly sensitive. Let me know if you want my check procedure. Regards, John
_________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.