I'm replaceing the front shocks on my '87 Syncro. It appears by looking at the bottom attachment point in the lower control arm, that I may have to remove the strut bar attachment point, to get to the nut on the front of the bolt holding the bottom of the shock in place. Is this true? And, to get to the top nut, do I have to remove the driver seat and "pull the rubber plug" to access? Geez, the rears are so easy! Thanks in advance for any help. Bob Stevens '87 Westy Syncro
http://groups.msn.com/BobsPhotoShare
_________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.