First of all, if you have not yet picked up the $40 Radio Shack Infrared thermometer, its on sale for $39.95. Using this wonderful tool, I noticed that on a short 5 mile trip, the temperature of my front wheel hubs were approaching 270 degrees. (The rear drums were a cool 170 degrees) This is confirming my suspicion that the front brakes are not fully releasing. I've replaced the rotors, calipers, hoses, and master cylinder, but none has improved the situation. Does anyone have any suggestions? The pedal feel is fine. Could having the wheel bearings too tight cause this problem?
thanks,
Todd '88 Westy P.S. If anyone has an East bay (Walnut Creek) area shop that they would recommend, please pass it on, I'm getting tired of fooling with this problem. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.