So I decided it was time to repack the CV joints and replace the torn boots. Got under the beast with a jack and hex-head socket. 4 bolts on the outboard side came off just fine. The other two are internally rounded (ie no flats for the allen to grab). Can't get Visegrips in there. Penetrating oil and/or a torch don't really seem to get to the threaded area. Any good ideas on how to get this thing out? I just got a set of Easy-outs so will give them a shot this weekend. Laurence '84 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.