Yes, 5 x 112mm is correct. Look for an offset around or less than 30mm so you don't need spacers. The center bore also needs to be at least 66mm to clear the hubs front and rear on a standard 2WD van. Some Audi, Vw and MBenz models use the same bolt circle, but the offset is usually higher. The VW and Audi rims require the center bore to be opened up, while the MBenz wheels and most aftermarket wheels already have the 66mm center bore. I found a set of MBenz/BBS wheels that I adapted for use on my van, please check my website for more info and photos. Good luck,
===== Tim Hannink Goldibox - 1987 Vanagon Camper, Wolfsburg Edition Winter Park, Florida http://home.earthlink.net/~tjhannink/ http://groups.yahoo.com/group/wolfsburg_campers http://photos.yahoo.com/tjhannink [Vanagon] Album __________________________________________________ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.