Date:         Wed, 18 Sep 2002 19:09:48 -0400
Reply-To:     kdlewis@JUNO.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Lewis <kdlewis@JUNO.COM>
Subject:      Re: Sensors for accessory gauges
Comments: To: Rubatoguy@MINDSPRING.COM
Content-Type: text/plain; charset=us-ascii

Todd;
        Check out:  http://Neksiwel.20m.com/cgi-bin/i/images/engine
I hope I typed that right. The oil sender is in the hole where the oil
filler tube used to be (bottom right). I made a small plate to adapt it.
I replaced the oil breather tower with some parts from CB Performance to
add oil. I like adding oil this way a lot better this way, just invert
the bottle into the tube. I will try and get a picture of it on my web
page soon.

Good Luck and Drive Safely
Ken Lewis
86 Crewcab, 60 356 T-5
http://Neksiwel.20m.com/

On Mon, 16 Sep 2002 12:58:06 -0700 Todd Last <Rubatoguy@MINDSPRING.COM>
writes:

> Also, are there other places to place an oil temp sensor if you do
> not want to use the oil drain plug?
>
> thanks,
>
> Todd
> '88 Westy
>
>

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.