Date:         Tue, 24 Sep 2002 01:06:41 EDT
Reply-To:     LorettiAK@CS.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Loretta Abbott-Kennon <LorettiAK@CS.COM>
Subject:      Re: Where is fan thermo-switch? 90GL
Comments: To: jfp7@hotmail.com
Content-Type: text/plain; charset="US-ASCII"

I don't know how this happened, but the housing truly is partially melted
(this is on my 2wd w/plastic housing, not the metal as on the syncro) it
melted at the mating surface to the engine where the o-ring is.  Engine
started right back up today after replacing all the parts and filling with
fresh water and coolant system flush.  Seems to be fine, I will report more
after replacing the thermo-switch and proper coolant.
Loretta

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.