Date:         Sat, 28 Sep 2002 10:00:58 EDT
Reply-To:     CMathis227@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chuck Mathis <CMathis227@AOL.COM>
Subject:      Re: Carbon-Fiber Shifter Console w/ VDO Gauges
Comments: To: kevindobrien@YAHOO.COM
Content-Type: text/plain; charset="US-ASCII"

Kevin,

The console looks infinitely useful and the dash sounds cool.  How much to
get a copy of the console without the guage holes?

My Digitool has been riding on an angle bracket attached to the shifter
console for several years.  It would look good mounted in your console on one
side with a couple guages on the other.

Chuck
'85 Wolfsburg Westy - 'Roland the Road Buffalo'

In a message dated 9/27/02 11:01:23 PM, LISTSERV@GERRY.VANAGON.COM writes:

>Date:    Fri, 27 Sep 2002 17:44:01 -0700
>From:    kevin obrien <kevindobrien@YAHOO.COM>
>Subject: Re: Carbon-Fiber Shifter Console w/ VDO Gauges
>
>I assume that "sweet" was said in your best Eric
>Cartman (South Park) Voice!
>
>I made the plug out of foam...skinned with
>Bondo...sanded to Hell and back...refined...sanded to
>Hell again...Primer-ed...sanded...primer-ed...
>Good thing I did this AFTER my divorce....or she'd
>really have had grounds!!!
>
>By the way...I've got the mold and could possibly
>reproduce these if anyone is interested.
>
>I've also got a full length dash in Carbon-Fiber..but
>it isn't installed yet...I'll post when it's in.
>
>kevindobrien@yahoo.com