Date:         Sat, 28 Sep 2002 07:14:56 -0700
Reply-To:     kevin obrien <kevindobrien@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         kevin obrien <kevindobrien@YAHOO.COM>
Subject:      Re: Carbon-Fiber Shifter Console w/ VDO Gauges
In-Reply-To:  <165.142da0a5.2ac7101a@aol.com>
Content-Type: text/plain; charset=us-ascii

Hey there:
I'd like to install a Digitool in the Dash Unit. Gotta
get one first..as building one is beyond my electrical
skills (as in none!)

I'm not set up to produce these...but I know guys that
can. I'll get the mold to them and find out what it
will cost (CarbonFiber is not cheap.)

Cheer!
Kevin

--- CMathis227@aol.com wrote:
> Kevin,
>
> The console looks infinitely useful and the dash
> sounds cool.  How much to
> get a copy of the console without the guage holes?
>
> My Digitool has been riding on an angle bracket
> attached to the shifter
> console for several years.  It would look good
> mounted in your console on one
> side with a couple guages on the other.
>
> Chuck
> '85 Wolfsburg Westy - 'Roland the Road Buffalo'
>
> In a message dated 9/27/02 11:01:23 PM,
> LISTSERV@GERRY.VANAGON.COM writes:
>
> >Date:    Fri, 27 Sep 2002 17:44:01 -0700
> >From:    kevin obrien <kevindobrien@YAHOO.COM>
> >Subject: Re: Carbon-Fiber Shifter Console w/ VDO
> Gauges
> >
> >I assume that "sweet" was said in your best Eric
> >Cartman (South Park) Voice!
> >
> >I made the plug out of foam...skinned with
> >Bondo...sanded to Hell and back...refined...sanded
> to
> >Hell again...Primer-ed...sanded...primer-ed...
> >Good thing I did this AFTER my divorce....or she'd
> >really have had grounds!!!
> >
> >By the way...I've got the mold and could possibly
> >reproduce these if anyone is interested.
> >
> >I've also got a full length dash in
> Carbon-Fiber..but
> >it isn't installed yet...I'll post when it's in.
> >
> >kevindobrien@yahoo.com


__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com