In a message dated 10/1/2002 4:52:41 PM Eastern Daylight Time, LISTSERV@GERRY.VANAGON.COM writes:
> There have been suggestions on the list from time to time about removing the > trim, boiling it, stretching it and so forth. This just doesn't work all > that well. Worked just fine for me. Since you have to take out the old trim to install your new one. Try heating it with a heat gun, stretching it, let it cool reinstall with glue. The glue is the trick to keep it from shrinking again. Even your new one will eventually shrink if you do not use glue. Cheers
Frank Condelli Almonte, Ontario, Canada <A HREF="http://members.aol.com/BusFusion/bfhome.htm">BusFusion</A> a VW Camper camping event, Almonte, ON, June 12 ~ 15, 2003 '87 Westy & Lionel Trains Member: <A HREF="http://www.vanagon.com/">Vanagon List</A>, <A HREF="http://www.bcn.net/~limbo/">LiMBO</A>, <A HREF="http://www.westfalia.qc.ca/">IWCCC</A> & Capital City VW Club Vanagon/Vanagon Westfalia Service in the Ottawa Valley <A HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless Steel Mufflers</A> <A HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli & Associates</A> or http://frankcondelli.com
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.