Date:         Wed, 2 Oct 2002 21:03:19 EDT
Reply-To:     Vwdude1957@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         digest Herbie Dave <Vwdude1957@AOL.COM>
Subject:      Bleeding the coolant question
Content-Type: text/plain; charset="US-ASCII"

I was wondering if someone would be so kind as to e-mail me the proper
proceedure for bleeding the coolant system once you have opened it up. You
bleed two areas, right? The radiator and the fitting over the thermostat
(take hose off?) I just changed the thermostat housing, both sensors and the
thermostat. Also, it looks as though my temp guage isn't working. Shouldn't
it move even when totally cold?
More to come.
Thanks.

Dave

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.