Date:         Mon, 7 Oct 2002 14:23:53 -0700
Reply-To:     The Old Volks Home <oldvolkshome@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         The Old Volks Home <oldvolkshome@EARTHLINK.NET>
Subject:      Re: Gasket ID?
Comments: To: Birkenfeld Jeff <BirkenfeldJeff@JOHNDEERE.COM>
In-Reply-To:  <441AE7AA2087D411B8FF00508BA0F8A8A4113A@e90dpsg2.dx.deere.c om>
Content-Type: text/plain; charset="us-ascii"

At 03:29 PM 10/7/02 -0500, Birkenfeld Jeff wrote:
>Andrew writes:
>I need new gaskets for the ATF pan(4 bolts), the base of the dipstick =
>hose is leaking as well.
>I also need a Differential(Trans) Pan gasket (10 bolts on pan)
>
>Jeff writes:
>The differential pan gasket is NLA as far as I know (not listed on ETKA).  I
>buy a roll of generic cork type gasket material and lay the pan on top of it
>tracing the pan outside diameter, then cut the cork/gasket shape out.  From
>there. I usually cut the inside of the gasket at 1/2" inch from the outside
>to form the replacement gasket.  Cost is about $5.00 a roll and you can make
>about 4 gaskets from a roll.
**************************
Check ETKA Again, Illustration 55-00 (Main Group 5, Sub Group 07)

VAG # 090 507 215


JIm
84 Westy 2.1
"Ole Putt"
68 Beetle
"Xavier"
73 Ghia Coupe
"Denise"

*Please Note NEW Addresses*
OldVolksHome@earthlink.net
jim96003@earthlink.net
***********
**Need to find the right dizzy?
Site Heavily Updated Sep 22, 2002!
Now with Type 3 & Type 4 Dizzy Listings!
http://www.oldvolkshome.com/ignition.htm
OR
http://www.oldvolkshome.com/ovhignbo.htm
**Upgrade your 83.5-85 Vanagon to 2.1
http://www.oldvolkshome.com/19to21.htm
***********