Well, how can I resist chiming in? :) Those holes are indeed the key- the two posts at either end of the spreader tool fit in there. You can do the job without the tool, but don't start into that AND expect to have all your original eyes & fingers when you're done! If you're already looking at buying the tool, why not spend a day at the junkyards instead? What you want is the 4-into-2 exhaust manifold and 2-into-1 downpipe from a Rabbit or Jetta up to 1981. Later Cabbies may have these, too. The nice thing is, these parts don't use those lousy C-clamps, AND give you a 10% power boost, AND should bolt right in. I did this with a Jetta recently, and it really is a nice addition. -Simon On Thursday, October 10, 2002, at 08:04 PM, Michael Brenner wrote: > To All, > > I had so much help last time, thanks Simon and others who responded, > that I > thought I'd give it another go. > Working on my 86 Cabriolet, and I'm trying to connect the exhaust > manifold > to the exhaust. Most normal cars do this by way of a nut and bolt > arrangement. However this car does by way of large metal "C" spring > clips, > with holes on the inside (for some purpose that is beyond me). After > trying > for over an hour as to figure out how to get these on, I thought I'd > turn to > "the list" to see if anyone else has ever put these back on and what > is the > proper way of doing so. Any help would be appreciated. > > Mike Brenner > ----- Original Message ----- > From: "DaveC" <voicebox@DNAI.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Thursday, October 10, 2002 5:02 PM > Subject: Re: changing girlfriend's oil > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.