Some earlier (air cooled maybe) just slip on with a bolt. My 91 is pressure fit. I tried to remove the plastic sleeve from the metal tube (another van) and I had a VERY hard time getting them to separate (I had to crush the metal pipe). It's off and waiting for me to figure out how to get the plastic part on my van's metal tube. It has been mentioned to boil the plastic in water to make it more pliable but I have no first-hand experience with this. Malcolm > I have the dreaded spraying oil problem. It looks like my leak > (slight) is it the union of the plastic portion of the filler tube and > the metal portion. How do these go together? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.