Jay The thermostat does not need to open because there is a small bypass valve built into the thermostat that allows enough flow for bleeding purposes. Use a brick or a stick to hold the throttle pedal for 3000 rpm. Alternatively use a cloths peg at the throttle cable connection in the engine compartment. Better still, get a helper. Larry Jay L Snyder wrote: > Well, you should at least wait until the thermostat opens! FAST is a > relative term when dealing with Vanagons. Besides, I can't reach the > throttle from the bleed bolt! > > Jay |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.