Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (October 2002, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 14 Oct 2002 12:21:31 -0500
Reply-To:     Stan Wilder <wilden1@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: making a vanagon pickup truck!!!
Comments: To: JordanVw@AOL.COM
Content-Type: text/plain; charset=us-ascii

Just out of curiosity ......... what kind of VW Van are you going to mutilate? A good 89 Plymouth Voyager has a value of about 600$. Your friends van sounds like it had reached the 198$ value base. I'd be a little skeptical about the rigid base of the frame after some radical cutting. I noticed that on most Vans (Type 1 and 2) even the steel panels behind the drivers seat back add structural support to the body. As for Vanagons I can see that they are engineered differently but I'd almost bet that if you get a good look at some Vanagon Single cab trucks you'll find compensating structural members added for the pickup body. Don't get me wrong, I'd say it would be a fun project to do.

Stan Wilder

On Mon, 14 Oct 2002 12:50:10 EDT JordanVw@AOL.COM writes: > this weekend i was over at my friends place, and he has a '89 > Plymouth > Voyager minivan.. the thing burns oil like crazy, he uses it for a > work van > and he was going to just junk it and get a newer pickup. jokingly, i > said, > "we should cut the top off and make it into a pickup truck" and he > said, > let me get the sawzall !!! 3 hours later it was a "pickup truck" > we cut > the roof off at the bottom of the window pillars and welded the > lower part of > the slider door in place to keep the body integrity, and left the > roof over > the cab (didnt cut A or B pillars) all we have left to do is > some finish > welding, and weld the back hatch onto the rear of the "cab" so it > wont be > open.. it wasnt hard at all..so yep ive decided to make a vanagon > pickup > truck.. all the canadian spec vanagon transporter pickups are WAY > to > overpriced, and just about all of them are no frills models with > manual > transmissions. i want a automatic vanagon pickup with all the > bells and > whistles.. > has anyone done this before? pics? ideas? > this should be a fun project :<) > chris > >

________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.