Date:         Thu, 17 Oct 2002 15:15:49 -0400
Reply-To:     Blake Heinlein <blakeheinlein@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Blake Heinlein <blakeheinlein@HOTMAIL.COM>
Subject:      Spark Plug Wire Resistance

Hi Everyone,

I was checking the resitance on the wire that goes from the coil to the
distributor cap.  Mine was 11,500 ohms.  The Bently Manual says they
should be about 2000 ohms.  Then I went and bought a new wire set and the
new one is 13,000 ohms.  I have an 84 1.9L digijet fuel system.  Does
anyone know what is going on here?

-Blake Heinlein
http:/members.accessbee.com/heinlein

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.