Date:         Sun, 20 Oct 2002 15:33:28 -0400
Reply-To:     kdlewis@JUNO.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Lewis <kdlewis@JUNO.COM>
Subject:      Re: adjusting CO with O2 sensor
Comments: To: patcal@CYBCON.COM
Content-Type: text/plain; charset=us-ascii

Pat;
        I disconnect the O2 sensor from the ECU and then monitor the
output of the sensor while making the adjustments. Check my web site
below for some more info.

Good Luck and Drive Safely
Ken Lewis
86 Crewcab, 60 356 T-5
http://Neksiwel.20m.com/

On Sun, 20 Oct 2002 08:07:17 -0700 Pat Callaghan <patcal@CYBCON.COM>
writes:
> Hi all,
>
>      I am going to check & maybe adjust my CO today & wanted to make
> sure I
> understood how to do this.  Warmed up, hook the + lead of the VOM to
> the
> single black wire from the O2 sensor, ground the - VOM lead.  The
> reading
> should be .5V.  Higher is richer & visa-versa.  Anything else to
> consider?
> Thanks.
>
> Pat Callaghan
> 87 Westy GL
> Portland, OR.
> www.patcal.com
>
>

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.