I just replaced mine on my 82 Westy, along with all the tubing. I had to remove the following: - instrument cluster, - glove compartment door, - heater duct - wiper motor and connecting rods (for the right side nozzle). What a pain. It was worse getting all back in. I need to do it again as the auto-parking on the wiper motor is no longer working. I will wait until I have forgotten how much a pain this was. I found it easier if I had someone pull on each nozzle while I was pushing the clips that secure them to the body. The passenger side was the worse as it required removing the wiper motor. Regards, --Jeff Strickrott, South Florida 82 Westy.
John Carpenter wrote: > Hi All, > Is there a way to remove these nozzles from the outside of the bus? > Or do I have to get to them from under the dash? > Thanks, > John C. > SLC, UT > 85 Westaru... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.