Date:         Sat, 26 Oct 2002 23:13:20 -0700
Reply-To:     Claudio Cella <claudiocella@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Claudio Cella <claudiocella@SHAW.CA>
Subject:      throttle valve switch
Content-Type: text/plain; charset=iso-8859-1

Hello to you all, need some direction on what to do.  Just removed my throttle valve switch on my 87 Vanagon with 2.1 engine.  My question is relatively simple but i was wondering how you list members reassembled unit.  Does one put a small amount of grease on the plastic cam / metal arm that actuates the switch or should it not be lubricated and left dry?  Not a big deal but i am curious on what would work best.  Thanks in advance.
Claudio Cella
87  Vanagon  GL   7 pass.
90  Jetta TD

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.