Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2002, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 28 Oct 2002 16:31:00 -0600
Reply-To:     Stan Wilder <wilden1@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: simple oil temp measurment..... will this work?
Comments: To: email99@BELLSOUTH.NET
Content-Type: text/plain; charset=us-ascii

It is my understanding that Frank Grunthaner has an engine with two oil coolers on it. He measures the temp going in and out on each one, in addition to oil temp from possibly two more locations. I think this is an experiment for him rather than normal practice. I also believe that you can find this report in the archives. When I want to know the real temperature on my Type IV air-cooled I put two drivers side wheels on a curb or park on an uphill incline them measure the temp through the oil fill pipe with a candy thermometer dropped down the tube. I don't question the new temperature measuring devices ............ I just don't want to waste this good $3.29 candy thermometer.

Stan

On Mon, 28 Oct 2002 16:09:04 -0500 Ed McLean <email99@BELLSOUTH.NET> writes: > Mathew Pollard wrote: > > "the books I have on engines always say the ideal oil temp is 109deg > C". > > I agree there is an ideal oil temperature but where do you measure > it? > > Is this measured in the oil pan, after it has been heated by the > engine, > or at the oil filter, after the oil cooler and immediately before > it > enters the oil galleys? > > I have measured oil temperature by strapping a thermocouple to the > oil > filter under a piece of foam insulation and it works ok. I > haven't > compared the temperatures to the oil pan temperatures. I think > Frank > Grunthaner recently made reference to the efficiency of the > oil-to-water > oil cooler in an I-4 engine so I believe he might have made these > measurements. > > At least in the VW world, measurements are usually made in the pan, > on > the dipstick, or in the oil filter adapter (for I-4 engines). All > these > are before the cooler. I wonder how much the temperature drops in > the > oil cooler? > > Let us know what you find out, Matthew. > >

________________________________________________________________ Sign Up for Juno Platinum Internet Access Today Only $9.95 per month! Visit www.juno.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.