Date:         Mon, 28 Oct 2002 18:15:41 -0800
Reply-To:     David Marshall <vanagon@VOLKSWAGEN.ORG>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Marshall <vanagon@VOLKSWAGEN.ORG>
Subject:      Re: I4 conversion oil leak
Comments: To: "MacLachlan, Bill" <Bill.MacLachlan@CITY.BURNABY.BC.CA>
In-Reply-To:  <430B80EDAA292242B986CCCC2E2084F615685D@COBVS1.city.burnaby.bc.ca.proxy>
Content-Type: text/plain; charset="iso-8859-1"

Which dipstick is this?  Are you using the dipstick opening next to the oil
filter flange or are you using a 50 degree conversion and using the one that
goes into the pan?  If it is the 50 degree pan then it is just a cork gasket
that you have to replace.  If it is a 15 degree or 50 degree conversion with
the dipstick going into the block - it is a compression fit - 15 degree
works well if you use the original tube - if you removed a 15 degree tube
for a 50 degree tube you'll find the compression fitting is rather lame and
it leaks - not too much you can really do about that = sort of the round peg
in the square hole issue.  My 50 degree swap with the dipstick here always
seeped oil a little.

If it isn't leaking around the base of the metal type but rather where the
dipstick goes in I would suggest that you have a crank case vent issue that
needed to be fix before the motor blows a seal.

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel Hixon Road
Quesnel BC Canada  V2J 6Z3

http://www.fastforward.ca    mailto:sales@fastforward.ca
Phone: (250) 992 7775        FAX: (250) 992 1160

- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of MacLachlan, Bill
Sent: October 28, 2002 2:08 PM
To: vanagon@GERRY.VANAGON.COM
Subject: I4 conversion oil leak


Can anyone point me to a Rabbit/Golf/Scirroco list with archives?
I've an irritating  oil leak where the ( unused) dipstick goes into the
block of my 1800 jetta motor.
( Please don't tell me I have to pull the motor apart to fix it!)
TIA

Bill M.
'82 Jetta powered GL