-----Original Message----- From: Kenneth Wilford [mailto:kenwilfy@comcast.net] Sent: Thursday, October 31, 2002 12:57 PM To: Birkenfeld Jeff Subject: RE: Rectangle headlight conversion to common 200mm headlights
It is funny that you should mention this. About 2 years ago this was something that was much talked about and discussed. I bought a pair of rectangular Cibie H4 just for this purpose. However, when I got them I found that I really couldn't see a way to make a frame for them. I wound up using a standard rectangular Vanagon outter headlamp instead of making a frame. The lamp was already cracked, so I just smashed the rest of the glass out. Then I had to cut away some of the reflector, but I left most of the reflector which still had the mounting tabs on it. Then I took the Cibie lamp and siliconed it in place with this industrial silicon that we had. That was 2 years ago. I promptly put the light in a box and forgot all about actually installing it on the van. Just last week I rediscovered this uninstalled project and decided to finish it. I hate fooling with the adjusters on these lights because they are so brittle and are junk. However one of my lights was burnt out, and I had a good excuse to install the H4 Cibie. It went on well and looks stock (if I didn't tell you, you would never know it wasn't the same as before). It puts out a lot more light than the stock DOT lens. I am pretty happy with it. I think it would work even better with a relay upgrade which is the next thing on the list. I still have to repeat this proceedure on the driver's side lens. If anyone is interested I could take some digital pictures and do a write up on it. I think the Cibie lights were under $100 a pair (it has been a long time so I could be wrong) and they are beautifully made lenses, and have the parking light bulb in them as well. If I remember correctly I bought them from Daniel Stern Lighting. 200mm Cibie H4. Just FYI. Thanks, Ken Wilford John 3:16 http://www.vanagain.com Phone: (856)-327-4936 Fax: (856)-327-2242 -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Birkenfeld Jeff Sent: Wednesday, October 30, 2002 12:04 PM To: vanagon@GERRY.VANAGON.COM Subject: Rectangle headlight conversion to common 200mm headlights
I remember awhile back a post where someone had converted conventional 200mm rectangle headlights to fit the '86 and later vanagon by fabricating a frame for the common headlight to fit the vanagon mounting. Anybody remember this post or a webpage showing this mod? Thanks, JB |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.