Date:         Tue, 29 Oct 2002 22:23:52 -0500
Reply-To:     Laurence Smith <laurence@ALANASMITH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Laurence Smith <laurence@ALANASMITH.COM>
Subject:      Re: Location of ground point 18 on 87 Westy.
Comments: To: Chris Schaefer <vanagon@1REALITY.ORG>
In-Reply-To:  <v0421010bb9e4f5300cfd@[10.1.1.60]>
Content-Type: text/plain; charset="us-ascii"

This wire grounds on the head of the engine (driver's side).

The connection bolt is under the intake manifold.

This ground wire branches off the sheath of wires that goes to the
Hall sender.  You can't see it come off the harness at the firewall.



Laurence Smith
Hamilton, ON
90 Westy (fanumbos)



> -----Original Message-----
> From: Vanagon Mailing List
> [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
> Of Chris Schaefer
> Sent: Tuesday, October 29, 2002 9:33 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Location of ground point 18 on 87 Westy.
>
>
> Hello All:
>      I'm looking for the location of ground point 18, ( as per the
> bentley wiring diagram).  This is the ground point which comes from
> the ECU pin 19.  It's described as "on engine block" and is supposed
> to be a brown wire.  However I can't seem to find this on
> my vehicle.
> I'm concerned that this could be part of my ECU problems.   Anyone
> know where this is located ?
>
> -C-
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> -=-=-=-=-=-=-=-=
> Chris Schaefer                                   Email:
> chris<AT>1reality.org
>              Professional Bit Twiddler and student of reality.
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> -=-=-=-=-=-=-=-=
>