Would I hear this as I tightened the adjustment screw or when the engine is warming up after the adjustment? ---------------------------- If your push rod isn't seated in the center of the lifter it will snap in with a resounding click, this might take five minutes of running. With a little care you can give the push rods a little twirl when you're adjusting the rockers and they will slip right into the seat. -------------- Clip --------------------- Sometimes the push rod doesn't seat properly in the lifter socket, > it will seat itself after a little use, you'll hear it snap into place ________________________________________________________________ Sign Up for Juno Platinum Internet Access Today Only $9.95 per month! Visit www.juno.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.